Alignment is generally recommended every 2–3 years or about 30,000 miles, and anytime after suspension work or a major pothole impact.

Idaho roads, seasonal frost heaves, and construction-related shifts in Boise can accelerate misalignment. For a 2025 Ram 1500 REV, follow that schedule as baseline maintenance and check sooner if you tow, haul, or drive on rough gravel roads frequently.

• Baseline guidance: every 2–3 years or ~30,000 miles
• After suspension parts replacement or steering repairs
• After hitting a large pothole or curb on Boise-area roads

Common signs are uneven tire wear, the truck pulling to one side, an off-center steering wheel, or unusual vibration at speed.

These symptoms indicate the 2025 Ram 1500 REV is not tracking to factory geometry. Idaho drivers often notice pull or vibration after winter road repairs or when driving canyon roads; a trained technician will confirm with measurements and road testing at the Boise service center.

• Uneven wear on inside or outside edges of tires
• Vehicle pulls left or right without steering input
• Steering wheel sits off-center when driving straight

A four-wheel alignment includes caster, camber, and toe adjustments to factory specifications, plus a suspension inspection and printed before-and-after readings.

For the 2025 Ram 1500 REV our service follows OEM procedures: we inspect suspension and steering components, measure alignment angles with calibrated equipment, make adjustments to factory specs, and provide a before/after printout and road test. These steps help ensure steering feel and tire life meet manufacturer intent.

• Suspension and tie-rod visual inspection before adjustments
• Caster, camber, and toe set to factory specifications
• Printed before-and-after alignment readings and road test

If steering or suspension components are worn—like tie rods, ball joints, or struts—an alignment alone will not hold and parts will need replacement.

At Larry H. Miller Chrysler Jeep Dodge Ram Boise our technicians inspect the 2025 Ram 1500 REV suspension during the alignment check and will point out worn parts that affect geometry retention. If components show play or damage, we document findings and recommend repair before final alignment adjustments.

• Technician checks tie rods, ball joints, control arms, and bushings
• Worn components must be repaired or replaced before final alignment
• Repairs are documented and estimated before any work proceeds

If the truck tracks straight and shows no tire wear, routine alignment at every service interval is not always necessary; alignments are most valuable after symptoms or component replacement.

For Boise drivers, alignment after suspension work, hitting a pothole, or noticing early tire wear preserves tire life and steering feel. Preventive alignment checks at scheduled services can catch drifting geometry before tires show irreversible uneven wear.

• Check alignment after suspension or steering repairs
• Perform alignment if you notice pull, vibration, or uneven wear
• Consider periodic checks in areas with frequent road work or frost heaves

Our four-wheel alignment process includes a full suspension inspection, computerized measurements, adjustments to factory specs, and a road test; timing fits within a standard service appointment.

Workload and any required repairs affect total time for a 2025 Ram 1500 REV, so our shop documents findings before proceeding. You can see current service specials and book a time online — we provide an explanation of needed work and printed alignment readings when complete.

• Pre-alignment inspection of steering and suspension components
• Computerized measurement and adjustment to factory geometry
• Post-adjustment road test and printed before/after report

A four-wheel alignment for the 2025 Ram 1500 REV follows these sequential steps so adjustments hold and handling matches factory intent. First, a technician performs a visual and hands-on inspection of steering and suspension parts—tie rods, control arms, ball joints, and bushings—to identify wear that would prevent a stable alignment.

Next, tire pressures are checked and tires rotated if requested. We then use OEM-calibrated alignment equipment to measure caster, camber, and toe on both front and rear axles. Adjustments are made to bring each angle to manufacturer specification, and a road test verifies steering response. The final step provides a printed before-and-after alignment report so you can see the exact corrections performed.

Warranty terms for alignment work are documented at service checkout when available. To schedule service, use our online schedule service form or view current service specials.

Factory alignment for the 2025 Ram 1500 REV centers on caster, camber, and toe settings for the front and rear axles; exact numeric specs come from OEM data for the model and are applied during calibration. Our technicians use manufacturer-grade alignment racks and computerized measurement heads aligned to Ram factory procedures to ensure precision.

Common alignment-related callouts for trucks of this class include toe drift from worn tie rods and camber changes after suspension impacts. When those conditions are present we document the issue and recommend necessary repairs prior to making final adjustments. Using OEM procedures reduces the chance of premature tire wear and maintains steering geometry designed for rear-wheel-drive trucks like the 2025 Ram 1500 REV.

Bring your 2025 Ram 1500 REV to Larry H. Miller Chrysler Jeep Dodge Ram Boise in Boise for a factory-spec alignment — schedule service.

Larry H. Miller Chrysler Jeep Dodge Ram Boise serves Boise and neighboring communities including Nampa, Meridian, and Caldwell with factory-style alignment service for the 2025 Ram 1500 REV. Local driving conditions—potholes, frost heaves, canyon roads, and occasional construction—make periodic alignment checks a practical part of vehicle care in the Treasure Valley.

Our service center performs a suspension inspection and alignment to factory geometry using calibrated OEM equipment. We document findings, provide printed before-and-after readings, and road test the vehicle. If additional repairs are required, we present an itemized estimate before proceeding so you can approve the work.

Find us at 222 S Auto Dr, Boise, ID 83709. To book, use the schedule service page or check current service specials for available offers and details.