Larry H. Miller Chrysler Jeep Dodge Ram Boise lists a four-wheel alignment for the 2025 Jeep Wrangler 4xe at $129–$199 with up-front pricing.

That price covers a full factory-spec alignment and includes an initial suspension inspection at our Boise service center. Pricing is posted up front so you know what to expect before work begins. Ask about current service specials that may reduce the final cost.

• Up-front $129–$199 price range at Larry H. Miller Chrysler Jeep Dodge Ram Boise
• Includes factory-spec caster, camber, and toe adjustments
• Before-and-after alignment printout provided

A typical four-wheel alignment for the 2025 Jeep Wrangler 4xe takes about 60 minutes at our Boise service center.

That duration includes a full vehicle lift, steering and suspension inspection, OEM alignment measurements, adjustments, and a road-test. If we find worn components the technician will discuss recommended repairs and revised timing. Use our online schedule service form to reserve a bay.

• About 60 minutes from inspection to road-test
• Includes OEM alignment equipment and before/after reports
• Additional time may be required if suspension parts need replacement

Get an alignment every 2–3 years or about every 30,000 miles, and always after suspension work or a major pothole impact.

Boise roads with seasonal frost heaves and construction can accelerate suspension wear, so check the alignment sooner if you feel pulling or notice uneven tire wear. Regular inspections during service visits help catch drift before it causes premature tires or handling issues.

• Routine interval: 2–3 years or ~30,000 miles
• Also after suspension repairs, new tires, or major impacts
• Check sooner in areas with frequent potholes or frost heaves

Common signs include uneven tire wear, the vehicle pulling to one side, an off-center steering wheel, or vibration at speed.

If you notice any of these while driving around Boise, have our technicians perform a suspension and alignment check. We document tire wear patterns, measure toe/camber/caster, and recommend corrective service along with repair estimates when needed.

• Uneven or accelerated tire wear patterns
• Vehicle pulls left or right or steering wheel is off-center
• Vibration or looseness felt at highway speeds

A four-wheel alignment includes a suspension and steering inspection, OEM caster/camber/toe measurement and adjustment to factory specs, and a printed before-and-after report.

Our technicians use factory procedures and alignment racks calibrated to manufacturer tolerances to ensure the 2025 Jeep Wrangler 4xe tracks like new. We also verify tire pressures, re-torque suspension fasteners as needed, and perform a short road-test to confirm handling.

• Full steering and suspension inspection
• Adjust caster, camber, and toe to factory specifications with before/after printout
• Final road-test and customer review of results

If adjustment won’t hold or measurements show excessive play, worn tie rods, ball joints, or struts are likely and require repair before alignment will hold.

Technicians at Larry H. Miller Chrysler Jeep Dodge Ram Boise inspect ball joints, tie rods, control arms, and bushings as part of the alignment check. If we find worn parts we’ll explain the needed repairs and how they affect alignment longevity and tire life.

• Inspection will reveal worn tie rods, ball joints, or strut issues
• Repairs may be required before a final factory-spec alignment
• We provide an estimate and timeline if extra work is needed

The four-wheel alignment for the 2025 Jeep Wrangler 4xe is a step-by-step process starting with a comprehensive steering and suspension inspection. Technicians check tie rods, ball joints, control-arm bushings, and tire pressures to identify anything that would prevent an accurate alignment. Next, we mount the vehicle on an OEM-calibrated alignment rack and measure caster, camber, and toe for front and rear positions.

Adjustments are made to return the 2025 Jeep Wrangler 4xe to factory specifications; a printed before-and-after alignment report documents the correction. A final road-test confirms handling and straight-line tracking. If additional repairs are required, we provide an estimate and explain how those repairs affect alignment and tire life. Schedule a service visit using our online scheduler.

Larry H. Miller Chrysler Jeep Dodge Ram Boise serves Boise, Nampa, Meridian, and Caldwell with alignment and chassis service adapted to Idaho driving conditions. Boise’s seasonal frost heaves, canyon roads, and periodic road construction increase the chance of alignment drift and suspension damage; routine checks help prevent uneven tire wear and handling issues.

Our service center at 222 S Auto Dr, Boise, ID 83709 uses OEM alignment equipment and diagnostic procedures. Our team has years of local experience maintaining Jeep models, and we document each alignment with before/after printouts for your records. Need to book an appointment? Use our schedule service form to reserve a time and get directions to the shop.

Alignment work on the 2025 Jeep Wrangler 4xe centers on returning caster, camber, and toe to manufacturer specifications for both front and rear axles. Technicians reference factory alignment charts and use OEM-calibrated racks to ensure adjustments meet published tolerances. Common local callouts for this model include toe drift after off-road use or pothole impacts and occasional uneven tire wear caused by suspension settling.

We use manufacturer procedures to measure and adjust each axis and provide a printed before-and-after report for your records. Bring your 2025 Jeep Wrangler 4xe to Larry H. Miller Chrysler Jeep Dodge Ram Boise in Boise for a factory-spec alignment — schedule service.